Intensive Trainings
Water Alternating Gas EOR
Dubai , United Arab EmiratesWhy Choose this Training Course It is known that two-third of the original oil in place are still in the ground. Petroleum companies are looking for techniques to improve sweep efficiency and increase recovery factors. The Water Alternating Gas (WAG) process can be optimized by using CO2 instead of natural gas, and adding some chemical…
Decom Cost Training: Managing and Minimising Decommissioning & Abandonment Cost Liabilities
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course Decommissioning Liabilities are clearly an unwanted burden on the Company Balance Sheet, but it should be appreciated that spending little effort on investigating their true extent carries a significant risk that actual costs will be much higher than necessary. Early investigation of likely costs allows key cost drivers to be…
Loading Master Training Certification Course for Oil & Gas
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day loading master training course. Oil Terminals should comply with all applicable international, national and local regulations, as well as their own policies and procedures. Similarly, Loading Masters and personnel operating at the oil terminal should be fully aware of the hazards of the petroleum products they…
Heavy Lift Training: Heavy Transport and Lifting
Singapore, Malaysia, Abu Dhabi, Dubai, PerthWhy Choose this Training Course This is a 3-day heavy lift training course held in Singapore, Malaysia, Perth, Abu Dhabi and Dubai. The efficient and safe execution of lifting and transporting objects that are heavy or awkward in size or shape involves specialized load handling equipment and various different modes of operation. These kinds of…
Advanced Maintenance and Reliability Management
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is a 3-day in-person maintenance and reliability training course. The effective maintenance management within chemical plants is a critical feature of plant operation, both in establishing the conditions for safe ongoing operation of the plant after commissioning, and in supporting the commercial success of the business. Many companies focus…
Strategies for Enhancing Reliability of Rotating Assets
Kuala Lumpur, SingaporeWhy Choose this Training Course This rotating assets reliability training is designed by Opus kinetic specially for petroleum, petrochemical, process & chemical industries to enhance rotating assets performance and reliability. This rotating assets reliability training course introduces modern science of reliability, methods to monitor condition, to achieve overall availability and business delivery. Who Should Attend…
Carbon Capture And Storage For Geoscientists And Engineers
Virtual Instructor Led Training (VILT)Why Choose this Training Course This CCS geoscientists training course will provide participants with awareness and understanding of the subsurface needs of CCS projects including subsurface CO2 storage volumetrics, CO2 flow in the subsurface away from injector wells, the objective of permanent and safe storage of CO2, and the key issues of reservoir depth, well…
TUV SIS Training: TÜV Rheinland Functional Safety Engineer Safety Instrumented Systems
Kuala Lumpur, SingaporeWhy Choose this Training Course This TUV SIS training course focuses on functional safety aspects for process, oil & gas, petrochemical and chemical industries according to IEC 61508 / IEC 61511. This includes the complete safety lifecycle in the context of Safety Instrumented Systems (SIS) projects. This TUV SIS training comprise of online tuition and…
Process Safety Leadership in High Hazard Facilities
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is a 3-days high hazard facilities training. The management of the risks associated with Health, Safety and Environmental, HSE threats to a business is becoming increasingly complex and as part of any credible global business, needs to be managed in a consistent, systematic manner. It is essential therefore that…
The Gulf of Mexico and its Continental Margins
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This 3-day Gulf of Mexico training synthesizes the product of a 35-year career studying the Gulf of Mexico, Mexico, Florida-Bahamas Cuba, Central America, the Caribbean, northern South America, and the opening history of the Atlantic basins. It represents a state-of-the-art assessment of what we know and don’t know in terms…
Direct Fired Heaters Training
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day direct fired heaters training course in Malaysia and Singapore. A long-established technology, direct-fired heaters have a history of successful operation at plants around the world. But combustion and heat transfer technologies are continually evolving. New engineered solutions for a complex new world of energy production dictate the…
Source to Sink Systems Masterclass
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This source to sink training course currently consists of 3-days sessions with roughly 25% theoretical lectures, 25% case studies and 50% exercises, a mixture that maximises the learning of key points and the online engagement of the delegates. It moves from sedimentological principles to study the influence of tectonics, topography,…
Managing EPC Contracts in the Energy Sector
Kuala Lumpur, Virtual Instructor Led Training (VILT)Why Choose this Training Course As the Energy industry matures; competition has intensified as organisations seek different ways in which to achieve a sustainable competitive advantage. One response to this has been to adopt a form of ‘risk transfer’ via outsourcing to make another party the ‘bearer’ of risk – i.e. appointing a contractor company…
API 570 Piping Inspection Standards & Application
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course On completion of this API 570 training course the participants will be able to perform the following: Understand piping assets better, know the importance of their upkeep and integrity management objectively. Plan inspections and take the inspection strategies to the next level of excellence. In this API 570 training course…
Best Practices in the Management and Execution of Incident Investigations
Kuala Lumpur, SingaporeWhy Choose this Training Course Major accidents occur infrequently, but can result in consequences beyond what the management envisage, resulting in a situation that escalates beyond the capacity of the company to recover both financially and reputationally. The 2010 Deepwater well blow-out accident is an example, whereby the company, BP, had to deal with a…
Decommissioning of Offshore Oil and Gas Installations
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course Decommissioning offshore Oil and Gas installations are an inevitable part of the ‘Life of Field’ activities. It carries a multi-billion $ cost with no commercial return. This offshore oil and gas decommissioning training course is essential to all those involved in decommissioning who need to be aware of their obligations…
The Hydrogen Economy
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a hydrogen training course. The Hydrogen Economy seeks to use hydrogen to replace fossil fuels for power generation and transport with a fuel that produces no carbon dioxide emissions. Hydrogen is used widely in the process industries. It is often produced at a considerable scale and often transported…
AML Training: Enhanced Assessment on Money Laundering and Terrorism Financing (ML/TF) Risks
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is a 2-day in-person AML training course. FATF Recommendations and domestic legislation require financial institutions and their supervisors to identify, assess and understand the ML and TF risks they face and to take effective actions to mitigate those risks. The purpose of these requirements is to focus AML strategies…
LOPA and SIL Determination
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-days LOPA and SIL training course. Layer of protection analysis (LOPA) is a semi-quantitative, order of magnitude, tool for analysing and assessing risk on a process plant used to evaluate the adequacy of existing or proposed controls (layers of protection) against known hazards to achieve tolerable risk…
Managing Project Costs and Budget Training
Bali , IndonesiaWhy Choose this Training Course This is a 3-day project costs and budget training. The achievement of successful project delivery is directly underpinned by focus and attention on the effective and efficient management of the financial dynamic. The project environment is uncertain and project teams must operate, not only within this uncertainty but also subject…
Integrated Offshore Commissioning
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day offshore commissioning training course. Cost (or loss) analysis on offshore mega projects very consistently show that it is during commissioning that the loss potential = overrun potential, will manifest itself. This is the phase where all the design flaws and construction errors will surface, and this…
Play Fairway Training: Play Fairway and Prospect Analysis
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course Learn what is increasingly becoming the standard methodology amongst major oil companies for screening basins and selecting blocks as well as to assemble and analyse a regional database in a systematic manner and then maintain the analysis as new data is acquired. This is an advanced level play fairway training…
Carbon Capture And Storage For Geoscientists And Engineers
Virtual Instructor Led Training (VILT)Why Choose this Training Course This CCS geoscientists training course will provide participants with awareness and understanding of the subsurface needs of CCS projects including subsurface CO2 storage volumetrics, CO2 flow in the subsurface away from injector wells, the objective of permanent and safe storage of CO2, and the key issues of reservoir depth, well…
API 510 Pressure Vessel Inspection
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This API 510 training course is designed to prepare participants to take the API 510 - Pressure vessel inspector certification examination conducted by American petroleum institute. The course modules cover the current body of knowledge for the 2024 examination and meets the effectivity sheets for the May 2024 examination. This…
TUV PHRA Training: TÜV Rheinland FS Engineer Process Hazard and Risk Analysis
Kuala Lumpur, SingaporeWhy Choose this Training Course This TUV PHRA training course focuses on the early lifecycle phases of hazard and risk analysis up to, and including, the development of the Safety Requirements Specification (SRS) for process, oil & gas, petrochemical and chemical industries according to IEC 61508 / IEC 61511. This 5-day course comprises 4 days…
ACPC Training Course: Advanced Certificate in Procurement Compliance
Kuala Lumpur, SingaporeWhy Choose this Training Course Certified by the International Federation of Purchasing and Supply Management (IFPSM) this advanced ACPC training course is designed for both Auditors and Procurement practitioners and leads delegates through a systematic approach to enable validation of compliance from the procurement function, whose activities impact upon both upon every line of annual…
Practical Data Science and Machine Learning for Oil & Gas Professionals
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This highly practical data science training course is designed to equip Oil & Gas professionals with a thorough introduction to essential machinlearning methods and a solid hands-on experience in data science and machine learning applications. Throughout this data science training, participants will acquire comprehensive knowledge and develop practical skills necessary…
Loading Master Training Certification Course for Oil & Gas
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day loading master training course. Oil Terminals should comply with all applicable international, national and local regulations, as well as their own policies and procedures. Similarly, Loading Masters and personnel operating at the oil terminal should be fully aware of the hazards of the petroleum products they…
ASME B31.3 Piping, Construction, Inspection, Maintenance, Repair & Integrity Assessment & Re-rating
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This ASME B31.3 piping training provides a comprehensive coverage of the examination requirements Body of Knowledge along with ASME B31.3 Code requirements. It includes descriptions of important new requirements of ASME B31.3, including the philosophy behind the changes. Further, the course has been enriched with the latest requirements of the…
Procurement Certification in Combatting Risk and Fraud
Kuala Lumpur, SingaporeWhy Choose this Training Course Delegates attending this procurement fraud training will understand how to reduce the risk and cost of fraud to their organisation and how to secure better value from better procurement and better contracting outcomes. Combating procurement fraud is vital. Procurement fraud costs SE Asia US$140billion each year. Nearly all organisations will…
Auditing Project Performance & Controlling Projects
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is a project audit training course. Billions of dollars every year are lost on failed or challenged projects, don’t let your project be one of them! Effective measures for auditing project performance and controlling projects is the key to any project’s success. However, do you know how to validate…
Human Factor Training: Integrating Human Factors into the Design and Operations Risk Framework
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day face-to-face human factor training course. In order to integrate human factors into an effective framework for managing risk in hazardous industries, companies need to address several key questions: How do we build a sustainable operating culture to deliver consistent behaviours within our employees, suppliers and contractors?…
Power Purchase Agreements for Renewable Energy
Kuala Lumpur, SingaporeWhy Choose this Training Course This renewable PPA course on RE PPAs focuses on enhancing your expertise in understanding Power Purchase Agreements (PPAs) for renewal energy by highlighting the challenges and opportunities; their contractual arrangements and a particular focus on strengthening negotiation skills - with special emphasis on multilateral negotiation with and within organizations and…
Human Factors Safety Critical Task Analysis (SCTA)
Kuala Lumpur, SingaporeWhy Choose this Training Course Human Factors is recognized as a key topic for addressing safety in the oil, gas, onshore chemical plants, pharmaceutical manufacturing and power generation sectors. What is Safety Critical Task Analysis (SCTA)? Task Analysis refers to the study of what actions and mental processes a person needs to perform to achieve…
Extended Reach Drilling
Bali , IndonesiaWhy Choose this Training Course Extended Reach Drilling (ERD) is a technology for drilling longer horizontal wells at a high inclination angle to reach underground oil/natural gas deposits further away from the drilling spot, instead of drilling wells vertically. In exploration and development of oil and natural gas, we drill wells to reach subsurface deposits…
Gas Well Performance & Deliquification
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This gas well training course provides the skills to understand and analyze gas well performance, and to select and design those remedial measures. It addresses all four gas well components i.e. reservoir performance, inflow performance, outflow performance and surface performance, individually and combined. Gas wells are the most uncertain and…
PSM Leadership Training: Leadership with Process Safety
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 2-days PSM leadership training. Many major incidents have technical failure as an immediate cause. Process safety leaders are capable of diving deeper and finding the organisational, culture and leadership decision-making that contributed to the incident. Analysis of the causes all major incidents has revealed that technical and…
Human Factors Safety Critical Task Analysis (SCTA)
Kuala Lumpur, SingaporeWhy Choose this Training Course Human Factors is recognized as a key topic for addressing safety in the oil, gas, onshore chemical plants, pharmaceutical manufacturing and power generation sectors. What is Safety Critical Task Analysis (SCTA)? Task Analysis refers to the study of what actions and mental processes a person needs to perform to achieve…
Project Risk Management
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is 3-days project risk training course. Projects involve many risks such as cost, schedule and resources. For example, you could have a delay in the schedule causing your project to be delayed by two weeks, and a resource that wasn’t available when you started the project is now available…
Managing Project Costs and Budget Training
Bali , IndonesiaWhy Choose this Training Course This is a 3-day project costs and budget training. The achievement of successful project delivery is directly underpinned by focus and attention on the effective and efficient management of the financial dynamic. The project environment is uncertain and project teams must operate, not only within this uncertainty but also subject…
Integrated Offshore Commissioning
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day offshore commissioning training course. Cost (or loss) analysis on offshore mega projects very consistently show that it is during commissioning that the loss potential = overrun potential, will manifest itself. This is the phase where all the design flaws and construction errors will surface, and this…
Human Factor Training: Integrating Human Factors into the Design and Operations Risk Framework
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day face-to-face human factor training course. In order to integrate human factors into an effective framework for managing risk in hazardous industries, companies need to address several key questions: How do we build a sustainable operating culture to deliver consistent behaviours within our employees, suppliers and contractors?…
Power Purchase Agreements for Renewable Energy
Kuala Lumpur, SingaporeWhy Choose this Training Course This renewable PPA course on RE PPAs focuses on enhancing your expertise in understanding Power Purchase Agreements (PPAs) for renewal energy by highlighting the challenges and opportunities; their contractual arrangements and a particular focus on strengthening negotiation skills - with special emphasis on multilateral negotiation with and within organizations and…
Project Scheduling and Cost Control
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is a 3-day project scheduling training. Develop effective measures for scheduling and controlling projects as you put the tools of project management to work. In this project scheduling training course, you’ll focus on managing the constraints you face in any project: limits on time, human resources, materials, budget and…
API 653 Storage Tank Inspector Certification
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This API 653 training course is designed for in-depth understanding of storage tanks with fixed and floating roofs, their basic design principles as per American Petroleum Institute API 650 standard. This fundamental course will prepare aspiring storage tank inspectors and maintenance staff to comply with industry best practices, API 653…
ACPC Training Course: Advanced Certificate in Procurement Compliance
Kuala Lumpur, SingaporeWhy Choose this Training Course Certified by the International Federation of Purchasing and Supply Management (IFPSM) this advanced ACPC training course is designed for both Auditors and Procurement practitioners and leads delegates through a systematic approach to enable validation of compliance from the procurement function, whose activities impact upon both upon every line of annual…
Certification in Strategic Talent Acquisition
Virtual Instructor Led Training (VILT)Why Choose this Training Course This is a 4-days talent acquisition training. Traditionally, organizational leaders have only two ways to find people to meet the needs of their organizations: (1) promote from within the organization; or (2) recruit from outside the organization. External recruitment (sourcing people from outside the organization) is often favored over internal…
Advanced Contract Negotiation and Post-Contract Management
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course Contracts are absolutely essential in the petroleum industry, and poor contract negotiations can result in many unnecessary and costly problems. When engaged in contract negotiations of all types and value, your skill as a contract negotiator may not only prevent losses and increase gains for you and your organization, but…
Drilling Essentials for New Engineers and Non-Technical Professionals
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This drilling training course is designed to provide participants with basic understanding of activities related to drilling, well completion as well as workover operations of oil and gas wells. It also provides cover of the entire drilling engineering process from the well planning phase to well completion throughout various rig…
Gas Explosion Hazards, Fire Detection and Protection Systems Design for Oil and Gas
Kuala Lumpur, SingaporeWhy Choose this Training Course This gas explosion training course is designed to provide an insight into the major drivers into fire and explosion hazard risk, and the various methods of preventing and mitigating such risk. The course will discuss quantitative consequence analysis, such as vapor dispersion modelling, vapor cloud explosion modelling, fire modelling, and…
PSM Leadership Training: Leadership with Process Safety
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 2-days PSM leadership training. Many major incidents have technical failure as an immediate cause. Process safety leaders are capable of diving deeper and finding the organisational, culture and leadership decision-making that contributed to the incident. Analysis of the causes all major incidents has revealed that technical and…
API 936 Refractory Inspection Standard
Classroom Learning (F2F)Why Choose this Training Course This is 3-day in-person API 936 training course in Dubai, Thailand and Malaysia, designed to train individuals on Refractory installation, inspection, testing and repair in accordance with API 936 Standard. API 936 provides guidelines for the installation quality control of monolithic refractory linings which is used to supplement owner specifications.…
Subsurface Characterization, Screening and Site Selection for Geologic CO2 Storage Sites
Virtual Instructor Led Training (VILT)Why Choose this Training Course Carbon Capture and Storage (CCS) is a key means of mitigating climate change and is the only option currently available to decarbonize industries such as cement, steel, petrochemicals and LNG. As opportunities in oil and gas decline, they are growing in CCS. Human activities now generate about 35Gt of CO2…
Seismic Sequence Stratigraphy for Exploration and Production
Virtual Instructor Led Training (VILT)Why Choose this Training Course Sequence Stratigraphy is a method developed to support geoscientists in the geologic interpretation of subsurface data. The method can be applied to 2D and 3D seismic in all depositional environments. This seismic sequence stratigraphy training will review the basic terminology and definitions of surfaces, systems tracts, sequence sets, and stratigraphic…
Materials and Spares Management – Effective Analysis
Classroom Learning (F2F)Why Choose this Training Course This is a 3-day classroom training course covering all aspects of materials and spares management in an oil and gas manufacturing plant. Key Learning Objectives To familiarize maintenance and engineering personnel with modern Materials and Spares Management To provide hands-on tools for increasing parts service factors (availability) in OPUs To…
Advanced Turnaround, Shutdown & Outage Management for Chemical, Oil and Utilities Industry
Singapore/Kuala Lumpur/BangkokWhy Choose this Training Course This is a 3-day in-person turnaround training course. The course provides an in depth understanding of the application of principles and practices involved in major shut-down/turnarounds and maintenance activities, including the management of ageing assets. The workshop which is run on a module basis addresses the core processes of organization,…
LNG Loading Master Certification
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day LNG Loading Master training course, both in-person and virtual in Singapore and Malaysia. The Loading Master is responsible for safe and smooth cargo operations. He is in charge of the so-called ship/shore interface. To be a trained loading master Opus Kinetic developed this comprehensive training program…
Masterclass in Production Sharing Contracts (PSC) Exploration and Production Rights and Agreements
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is a 3-day PSC training course. Participants in this course will gain valuable insights into the operations of the Oil and Gas Industry and the use of Production Sharing Contracts (PSC) in Exploration and Production stages of the Oil and Gas Industry. The life blood of the industry is…
API 510 Pressure Vessel Inspection
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This API 510 training course is designed to prepare participants to take the API 510 - Pressure vessel inspector certification examination conducted by American petroleum institute. The course modules cover the current body of knowledge for the 2024 examination and meets the effectivity sheets for the May 2024 examination. This…
Feasibility Studies for Carbon Capture and Storage (CCS) Facility Development
Singapore , SingaporeWhy Choose this Training Course This CCS feasibility studies training course provides participants with the necessary skills and knowledge to conduct feasibility studies for the development of Carbon Capture and Storage (CCS) facilities. Through practical case studies, technical analysis, and regulatory considerations, participants will learn how to assess the viability of their sites for CCS…
ACPC Training Course: Advanced Certificate in Procurement Compliance
Kuala Lumpur, SingaporeWhy Choose this Training Course Certified by the International Federation of Purchasing and Supply Management (IFPSM) this advanced ACPC training course is designed for both Auditors and Procurement practitioners and leads delegates through a systematic approach to enable validation of compliance from the procurement function, whose activities impact upon both upon every line of annual…
Carbon Capture And Storage For Geoscientists And Engineers
Virtual Instructor Led Training (VILT)Why Choose this Training Course This CCS geoscientists training course will provide participants with awareness and understanding of the subsurface needs of CCS projects including subsurface CO2 storage volumetrics, CO2 flow in the subsurface away from injector wells, the objective of permanent and safe storage of CO2, and the key issues of reservoir depth, well…
ACEA Training Course: Advanced Certificate for the Executive Assistant
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course The ACEA training course is a Groundbreaking, Globally Recognised, Certified Training Program for the modern day Executive Assistant. The Advanced Certificate for the Executive Assistant: ACEA® is a world-leading intensive and interactive 5-day executive level training programme, that equips current and aspiring Executive Assistants with the skills and knowledge they…
Succession Management Masterclass
Virtual Instructor Led Training (VILT)Why Choose this Training Course This is a 4-day succession management training course. Who will lead your organization into the future? Have they been identified? Are they prepared to lead effectively in light of shifting trends, new business practices, and a more diverse employee population? How do you more precisely take action on creating current…
Power Purchase Agreements for Renewable Energy
Kuala Lumpur, SingaporeWhy Choose this Training Course This renewable PPA course on RE PPAs focuses on enhancing your expertise in understanding Power Purchase Agreements (PPAs) for renewal energy by highlighting the challenges and opportunities; their contractual arrangements and a particular focus on strengthening negotiation skills - with special emphasis on multilateral negotiation with and within organizations and…
Commercial Contracts for Non-Lawyers
Kuala Lumpur, SingaporeWhy Choose this Training Course Modern business is increasingly complex and so too are the challenges associated with commercial contracting. Quite often, individuals find themselves in a position where they are uncertain as to what the strange legalistic language is actually saying and what this then means from an interpretive perspective. This commercial contract training…
Stuck Pipe Prevention & Fishing Operations
Malaysia , MalaysiaWhy Choose this Training Course Prevention of stuck pipe is important for the professionals who are facing these issues in their work scope and find the solutions to solve the situations and prevent it to happen again. This stuck pipe training course will emphasize on the observations of sticking mechanisms and the root causes which…
LOPA and SIL Determination
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-days LOPA and SIL training course. Layer of protection analysis (LOPA) is a semi-quantitative, order of magnitude, tool for analysing and assessing risk on a process plant used to evaluate the adequacy of existing or proposed controls (layers of protection) against known hazards to achieve tolerable risk…
Introduction to Drilling and Completion and Well Intervention (DCWI)
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This is a drilling completion training course. The drilling and CWI discipline is a very specialized field, with a lot of unique and dedicated equipment. The technology is difficult to understand as it happens underground and can only be imagined. For young, new and/or staff from support departments there is…
Heavy Lift Training: Heavy Transport and Lifting
Singapore, Malaysia, Abu Dhabi, Dubai, PerthWhy Choose this Training Course This is a 3-day heavy lift training course held in Singapore, Malaysia, Perth, Abu Dhabi and Dubai. The efficient and safe execution of lifting and transporting objects that are heavy or awkward in size or shape involves specialized load handling equipment and various different modes of operation. These kinds of…
API 653 Storage Tank Inspector Certification
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This API 653 training course is designed for in-depth understanding of storage tanks with fixed and floating roofs, their basic design principles as per American Petroleum Institute API 650 standard. This fundamental course will prepare aspiring storage tank inspectors and maintenance staff to comply with industry best practices, API 653…
ESG Impact & Sustainability Communication
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This 2-day in-person ESG Communication training course reinforces the importance of developing and implementing purposeful communication, and teaches communication professionals a number of practical ways they can improve the way they communicate their organisation’s social impact and performance. Explore how to communicate with stakeholders more openly and build trusted internal…
Well Completion and Workover
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course The well completion training course is designed to give an overview of well completions as well as workover operations being carried out to maintain well integrity and availability for production/ injection. It introduces completion techniques, equipment, perforating methodologies and techniques, wellhead and downhole equipment, hydraulic fracturing, acidizing, squeeze cementing and…
Bid Management and Tender Evaluation
Virtual Instructor Led Training (VILT)Why Choose this Training Course This is a 4-day bid and tender training course. The emphasis of learning is to provide a framework within which an effective and efficient tender process can be designed and implemented, a positive approach that leads not only to the appointment of appropriate suppliers but to ensuring that the ongoing…
ISA/IEC 62443 Cybersecurity Fundamentals Specialist (IC32)
Virtual Instructor Led Training (VILT)Why Choose this Training Course This is a 4-day ISA/IEC 62443 Cybersecurity Fundamentals Specialist training course. The ISA/IEC 62443 standards define requirements and procedures for implementing electronically secure automation and control systems and security practices, and assessing electronic security performance. The cybersecurity standards, and the resulting training, certification, and certificate programs, cover the complete lifecycle…
Leadership Communication for Managers
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a one-day managers communication training. Poor manager communication skills are consistently one of the top barriers to successful employee communication. When managers communicate well with employees, the organisation benefits through timeliness, clarity, relevance and consistency of messages. This course will equip you with the essential skills you need…
Advanced HAZOP Masterclass
Classroom Learning (F2F)Why Choose this Training Course In this advanced HAZOP training course, the trainer will introduce numerous class exercises based on real life case to aid in delegates’ understanding of the topics throughout the course. Delegates will be firstly introduced to refresher topics of HAZOP such as bowties, swiss cheese and LOPA, the human factors and…
HAZOP Training: Hazard Studies and HAZOP Team Leader
Kuala Lumpur, SingaporeWhy Choose this Training Course This is a 3-day HAZOP training course. HAZOP and Hazard studies are an essential part of effective process safety management and HSE risk management. This course covers various process hazard assessment (PHA) techniques that team leaders must understand and be able to apply as well as facilitation skills required to…
Advanced Basin Analysis in Deepwater Setting
Kuala Lumpur, Virtual Instructor Led Training (VILT)Why Choose this Training Course This intensive GoM basin analysis training course provides a comprehensive examination of the Gulf of Mexico's tectonic, stratigraphic, and petroleum systems. Participants will explore the basin framework, Mesozoic and Cenozoic play maps, source rock and trap mistiming issues, and real-world success and failure cases of deep-water wells. Each day includes…
ESG Impact & Sustainability Communication
Kuala Lumpur Federal Territory of Kuala Lumpur, Kuala Lumpur, MalaysiaWhy Choose this Training Course This 2-day in-person ESG Communication training course reinforces the importance of developing and implementing purposeful communication, and teaches communication professionals a number of practical ways they can improve the way they communicate their organisation’s social impact and performance. Explore how to communicate with stakeholders more openly and build trusted internal…